Case 01Read the full case
Aerospace structural parts on the G300
Square billets machined to five faces in two operations, with deep holes, bores and threads in the same part.
±0.02 mm
Ra ≤ 0.8 µm
32 min
Five-axis applications
Robotics
Robot components are die-cast aluminium, often thin-walled, with threads, bores and tapped holes in the same part. Five faces in two operations on the G300 fits high-mix robot part production.
Discuss your application
01 / Applications
What we machine.
Robot joints
Threads, bores and tapped holes finished on one fixture.
Die-cast housings
Parts around 128 × 105 × 138.5 mm — five faces in two operations.
Arm & linkage parts
Thin-walled aluminium kept stable with light, fast finishing passes.
02 / Materials
Die-cast aluminium6061 aluminium
04 / Processes & geometry
Five faces, fewer setups
One datum face, then five faces without moving the part — no stacked error from re-clamping.
Thin walls, high-speed finishing
Light, fast passes keep thin ribs and frames stable.
05 / Case study
Bring the part. We'll bring the process.
Tell us the geometry, material and tolerance — we'll map it to a platform and a first-pass process.
Discuss your application